UPA 15-1.5 High efficiency circulation pump Application1. Domestic heating and hot water circulation systems
2. Water heater circulation system
UPA 15-1.5 II BL High efficiency circulation pump Application1. Domestic heating and hot water circulation systems
2. Water heater circulation system
UPA 15-1.5 High efficiency circulation pump
Easy to install and operate
Equipped with an adaptive AUTO mode (default setting), the pump operates once connected to a power source and adjusts its performance according to actual system needs.
Has external temperature control, timer and pipeline flushing.
Low noise, high comfort
Noise index: ≤42dB(A)
Low power consumption
Minimum power consumption up to 5 W
Multiple protection
Current carryover protection
quick release power plug
Quick start and stop of the pump.
| Position | Descriptions |
| 1 | Constant speed operating mode indication |
| 2 | Indication of automatic operating mode |
| 3 | Temperature control mode indication |
| 4 | 1. Specified power 2. running (or stopping) time specified in synchronization mode |
| 5 | Operating (or stopping) hours set in time mode to display |
| 6 | Running (or stopping) minutes set in time mode to display |
| 7 | Powertrain shown during normal operation |
| 8 | 1. Include different running modes 2. Increase time in synchronization mode |
| 9 | Reducing time in sync mode |
★ Press buttons 8 and 9 to switch between different control modes.
| Supply voltage | 220-240V 50/60Hz, PE |
| Engine protection | No external protection required |
| IP class | IP42 |
| Insulation class | F |
| Humidity（RH） | Max 95% |
| System pressure | 1.0 MPa |
| Agreement | CE/ GS/ EMC/ LVD/ROHS/REACH |
| Ambient temperature | 0～+40℃ |
| Temperature class | TF95 |
| Liquid temperature | 2～+110℃ |
constant speed characteristic curve
| Power(w) | Model | Max. Flow(m³/h) | Voltage/Frequency | Material | Motor pump control mode | Parcel size (mmxmmxmm) | Mass(kg) | |||||
| 230V50/60Hz | Copper | Constant speed operation | Automatic operating mode | Temperature control mode | Sync Mode | Flushing function | Inner Box | G.W. | N.W. | |||
| 8 | UPA15-1.5B | 0.9 | ● | ● | ● | ● | ● | ● | ● | 180x115x150 |
1.2 |
1 |
UPA 15-1.5 II BL High efficiency circulation pump
Easy to install and operate
The pump runs after power is turned on and always runs at maximum speed.
Low noise, high comfort
Noise index: ≤42dB(A)
Low power consumption
Energy consumption up to 5 W.
Multiple protection
Current carryover protection
quick release power plug
Quick start and stop of the pump.
| Supply voltage | 220-240V 50/60Hz, PE |
| Engine protection | No external protection required |
| IP class | IP44 |
| Insulation class | H |
| Humidity（RH） | Max 95% |
| System pressure | 1.0 MPa |
| Agreement | CE/ GS/ EMC/ LVD/RoHS/REACH |
| Ambient temperature | 0～+40℃ |
| Temperature class | TF110 |
| Liquid temperature | 2～+110℃ |
constant speed characteristic curve
| Power(w) | Model | Max. Flow (m³/h) | Voltage/Frequency | Material | Motor pump control mode | Parcel size (mmxmmxmm) | Mass(kg) | |||||
| 230V 50/60Hz | Copper | Constant speed operation | Automatic operating mode |
Temperature control mode |
Sync Mode |
Flushing function |
Inner Box | G.W. | N.W. | |||
| 5 | UPA15-1.5IIBL | 0.9 | ● | ● | ● | / | / | / | / | 180x115x150 | 1.2 | 1.0 |
