Installation and useQJM deep -sea stainless steel pump uses a multi -stage impeller structure, high pressure, a wide range of applications. Suitable for drilling wells, pumping water from ponds and lakes, irrigation of lawns, tap water for life, water supply to the pools, water troops and tanks, fountains, irrigation in agriculture, etc.
The temperature of the medium does not exceed + 40 ° C;
The value of the PH of the environment is from 6.5 to 8.5;
The ratio of the volume of solid impurities in the environment does not exceed 0.1%, and the diameter of the particles does not exceed 0.2 mm;
Immersion depth of not more than 70 meters;
The minimum applicable diameter of the well: 4.
Pump body: stainless steel
Leaf wheel: pom, sandbuilding wheel
Diffuser: PC
Engine axis: stainless steel or steel 45 #
Mechanical seal: ceramic graphite or silicon carbide - graphite
Electric motor: lubricant x005f
Oils used with food). Single -phase 150V - 240V - 50Hz / 60Hz, a copper winding has a built -in capacitor of protection against thermal overload with a launch control box. Three -phase 300V - 400V
Isolation: Level b
Protection: IP X8
Model |
Power |
Max. Napal (m) | MAX. Stream (l/min) | Exit (Inch) |
Q | L/min | 0 | 17 | 34 | 50 | 66 | 83 | 100 | Caliber |
m³/h | 0 | 1 | 2 | 3 | 4 | 5 | 6 | inch | ||||||
4QJm4/7-0.37 | 0.37 | 46 | 6.5 | 1.5" | H(m) | 46 | 39 | 35 | 31 | 24 | 16 | 5 | 1.5" | |
4QJm4/9-0.55 | 0.55 | 59 | 6.3 | 1.5" | 59 | 50 | 45 | 40 | 31 | 21 | 6 | 1.5" | ||
4QJm4/11-0.75 | 0.75 | 72 | 6.5 | 1.5" | 72 | 62 | 55 | 48 | 37 | 25 | 8 | 1.5" | ||
4QJm4/16-1.1 | 1.1 | 104 | 6.5 | 1.5" | 104 | 90 | 80 | 70 | 54 | 37 | 12 | 1.5" | ||
4QJm4/20-1.5 | 1.5 | 130 | 6.7 | 1.5" | 130 | 112 | 100 | 88 | 68 | 46 | 15 | 1.5" | ||
4QJm4/23-1.8 | 1.8 | 150 | 6.4 | 1.5" | 150 | 129 | 115 | 101 | 78 | 53 | 17 | 1.5" | ||
4QJm4/26-2.2 | 2.2 | 189 | 6.5 | 1.5" | 189 | 164 | 144 | 122 | 87 | 60 | 20 | 1.5" |
Model |
Power |
Max. Napal (m) | MAX. Stream (l/min) | Exit (Inch) |
Q | L/min | 0 | 20 | 40 | 60 | 80 | 100 | 120 | 140 | Caliber |
m³/h | 0 | 1.2 | 2.4 | 3.6 | 4.8 | 6 | 7.2 | 8.4 | inch | ||||||
4QJM6/7-0.75 | 0.75 | 48 | 9 | 1.5" | H(m) | 48 | 47 | 44 | 41 | 38 | 29 | 22 | 14 | 1.5" | |
4QJM6/10-1.1 | 1.1 | 69 | 9.1 | 1.5" | 69 | 67 | 63 | 58 | 54 | 42 | 32 | 20 | 1.5" | ||
4QJM6/14-1.5 | 1.5 | 97 | 8.8 | 1.5" | 97 | 94 | 88 | 81 | 76 | 59 | 45 | 28 | 1.5" | ||
4QJM6/17-1.8 | 1.8 | 117 | 9 | 1.5" | 117 | 114 | 107 | 99 | 92 | 71 | 54 | 34 | 1.5" |
Model |
Power | Max. Napal (m) | MAX. Stream (l/min) | Exit (Inch) |
Q | L/min | 0 | 20 | 40 | 60 | 80 | 100 | 120 | 140 | 160 | Caliber |
m³/h | 0 | 1.2 | 2.4 | 3.6 | 4.8 | 6 | 7.2 | 8.4 | 9.6 | inch | ||||||
4QJm8/6-0.75 | 0.75 | 38 | 12.5 | 2" | H(m) | 38 | 36 | 33 | 31 | 30 | 28 | 25 | 19 | 12 | 2" | |
4QJm8/8-1.1 | 1.1 | 50 | 12.5 | 2" | 50 | 48 | 44 | 42 | 40 | 38 | 33 | 25 | 16 | 2" | ||
4QJm8/12-1.5 | 1.5 | 76 | 12.5 | 2" | 76 | 72 | 66 | 62 | 60 | 56 | 49 | 37 | 24 | 2" | ||
4QJm8/14-1.8 | 1.8 | 88 | 12.5 | 2" | 88 | 84 | 77 | 73 | 70 | 66 | 57 | 43 | 28 | 2" |
Model |
Power |
Max. Napal (m) | MAX. Stream (l/min) | Exit (Inch) |
Q | L/min | 0 | 30 | 60 | 90 | 120 | 150 | 180 | 210 | 240 | Caliber |
m³/h | 0 | 1.8 | 3.6 | 5.4 | 7.2 | 9 | 10.8 | 12.6 | 14.4 | inch | ||||||
4QJM10/7-1.1 | 1.1 | 43 | 15.3 | 2" | H(m) | 43 | 43 | 40 | 38 | 35 | 32 | 25 | 15 | 4 | 2" | |
4QJM10/9-1.5 | 1.5 | 56 | 15.3 | 2" | 56 | 55 | 51 | 48 | 45 | 41 | 32 | 19 | 5 | 2" | ||
4QJM10/11-1.8 | 1.8 | 68 | 15.3 | 2" | 68 | 67 | 63 | 59 | 55 | 50 | 39 | 24 | 7 | 2" |
Model |
Power |
Max. Napal (m) | MAX. Stream (l/min) | Exit (Inch) |
Q | L/min | 0 | 50 | 100 | 150 | 200 | 250 | 300 | 350 | 400 | Caliber |
m³/h | 0 | 3 | 6 | 9 | 12 | 15 | 18 | 21 | 24 | inch | ||||||
4QJm16-16/5-1.1 | 1.1 | 29 | 27 | 2" | H(m) | 29 | 28 | 27 | 26 | 22 | 19 | 16 | 11 | 9 | 2" | |
4QJm16-19/6-1.5 | 1.5 | 35 | 27 | 2" | 35 | 34 | 32 | 31 | 26 | 22 | 19 | 13 | 11 | 2" | ||
4QJm16-22/7-1.8 | 1.8 | 41 | 27 | 2" | 41 | 40 | 37 | 36 | 30 | 26 | 22 | 15 | 13 | 2" |