terms of Use• Liquid temperature up to 60°C
• Ambient temperature up to 40°C
• Total inhalation rise up to 9 m
• Continuous operation
WZB Peripheral Pumps are suitable for use with clean water that does not contain abrasive particles and liquids that are not chemically aggressive to the materials from which the pump is made. The pump must be installed indoors or at least protected from the weather.
Suitable for clean water without crushed particles and for liquids that are not chemically aggressive to the materials used to make pumps.
Because of their compactness, reliability and ease of use, they are suitable for domestic applications such as water distribution in combination with low pressure devices, for irrigation of gardens and distribution areas, for pumping water from a reservoir, as well as for all other cases where air or water may be present in the water to be pumped. The pump is equipped with a plate check valve.
Pumps should be installed in a closed environment or at least protected from bad weather.
• Pump housing: cast iron
• Pump bracket: cast iron
• Motor housing: aluminum
• Impeller: brass
• Motor axis: carbon steel, AlSI304 SS if required
• Mechanical seal: ceramic / graphite
• Bipolar induction motor (n = 2850 r.p.m)
• Insulation class B
• Protection IP44
• Continuous service Sl
• Thermal protection
• Single phase 220 V / 50 Hz, 60 Hz (if necessary)
Model | Input power | Q(m³/h) | 0 | 0.3 | 0.6 | 0.9 | 1.2 | 1.5 | 1.8 | 2.1 | 2.4 | 2.7 | 3.0 | |||
KW | HP | Q(L/min) | 0 | 5 | 10 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | |||
WZB60 | 0.37 | 0.5 | H(m) | 35 | 30 | 25 | 20 | 15 | 10.5 | 6.5 | 3 | |||||
WZB70 | 0.55 | 0.75 | 55 | 49 | 43 | 37 | 30 | 23 | 17 | 12 | 8 | 5 | ||||
WZB80 | 0.75 | 1.0 | 65 | 59 | 52 | 45 | 38 | 31 | 25 | 19 | 14 | 10 | 7 | |||
1ZDB35 | 0.37 | 0.5 | 35 | 30 | 25 | 20 | 15 | 10.5 | 6.5 | 3 | ||||||
1ZDB45 | 0.55 | 0.75 | 55 | 49 | 43 | 37 | 30 | 23 | 17 | 12 | 8 | 5 | ||||
1ZDB65 | 0.75 | 1.0 | 65 | 59 | 52 | 45 | 38 | 31 | 25 | 19 | 14 | 10 | 7 |
Performance graph n = 2850 RPM
Model | Input/output | N.W | L×W×H | |||
(Inch) | (Kg) | (mm) | ||||
WZB60 | 1"×1" | 6.8 | 255×180×245 | |||
WZB70 | 1"×1" | 9.5 | 280×185×255 | |||
WZB80 | 1"×1" | 12.2 | 290×200×275 | |||
1ZDB35 | 1"×1" | 6.6 | 275×200×245 | |||
1ZDB45 | 1"×1" | 9.5 | 305×205×260 | |||
1ZDB65 | 1"×1" | 11.5 | 305×205×260 |
Numbers | Notes | Numbers | Notes | Numbers | Notes |
1 | Discharge plug | 13 | Mechanical seal | 25 | Cable press |
2 | "O" Ring | 14 | "O" Ring | 26 | Nuts |
3 | Latch | 15 | Pump bracket | 27 | clamping panel |
4 | Pump housing | 16 | Latch | 28 | In Fairlea |
5 | Inlet flange | 17 | Housing with wound stator | 29 | Condenser |
6 | Latch | 18 | Driving | 30 | Drop protection |
7 | check valve | 19 | Latch | 31 | Relationship |
8 | Loading plug | 20 | Fan | 32 | Key |
9 | "O" Ring | 21 | Fan cover | 33 | Rotor |
10 | Wheel | 22 | Latch | 34 | Relationship |
11 | Clamp ring | 23 | Clamp cover | 35 | Open ring |
12 | Washing machine | 24 | Screw |