50WQ(D)S-CF Series Cutting Non-clogging Stainless Steel Sewage Pump

50WQ(D)S-CF Series Cutting Non-clogging Stainless Steel Sewage Pump

Model analysis:

Scope of application:

The cutting part of the new WQ(D)S - C sewage cutting pump has a unique spiral structure and sharp blade design. In the premise of providing hydraulic properties, highly efficient and more than similar products, but also has a certain cutting ability, so that straw, cotton, cloth, baby diapers and other waste after cutting have excellent cutting function.

1.Full pressure, low power consumption; (Results are based on actual testing reporting changes in power curve).

2.WQ(D)S series stainless steel is suitable for 0 - 25m, large flow, medium and low head.

3. Removable knife head design.

4. The cutting part is made of material with a Rockwell hardness of 48 HR or higher; Special materials require pre-setting.

In particular:

The base distance is 25cm for installation and use, to avoid inhalation of stones, screws and other hard materials, after replacing the cutting device, special attention should be paid to ensure that the gap between the impeller and the cutting plate should be controlled to 0.1 - 0.25mm , the fluidity of the liquid slag is too low; it is necessary to run it with water.

Operating restrictions:

1. Immersion depth: 5m

2. Liquid temperature up to + 40 °C

3. Ambient temperature up to + 40 °C "

Structural features:

● Pump body: cast iron

● Motor housing: cast iron

● Cutting piece: alloy with hardness 48 HR or higher

● Motor axis: 45# steel

● Mechanical seal: graphite - silicon carbide

● Insulation class: F

● Protection class: IP68

Wheel:

The impeller is the main part of the WQ(D)S - C pump and is made of alloy. Unique reverse tilt effectively prevents material from wrapping.