ZEN brand 2CPM Centrifugal Pump is the ideal choice for those who need a reliable, efficient and innovative water pumping solution. Trust the ZEN brand for all your deep well pumping needs.
ApplicationIt is used for purifying water and liquids that are not chemically aggressive to materials for the manufacture of pumps.
The efficiency and adaptability of these pumps, even for the most unusual applications, are ideal for use in the domestic, civil and industrial sectors, especially in water distribution, pressure and fire-fighting applications combined with pressure devices.
Pumps should be installed in a closed environment or at least protected from bad weather.
• Liquid temperature up to 60°C
• Ambient temperature up to 40°C
• Total inhalation rise up to 8 m
• Pump body: Cast iron
• Pump bracket: Cast iron
• Motor housing: Aluminum
• Wheel: Brass
• Motor axis: Carbon steel, AlSI304 SS, on request
• Mechanical seal: SIC / Graphite
• Bipolar induction motor (n = 2850 r.p.m)
• Insulation class B
• Protection IP44
• Continuous SI Maintenance
• Single phase thermal protector
• Single phase 220 V / 50 Hz, 60 Hz (if necessary)
• Three-phase 380V / 50Hz, 60Hz (if necessary)
| Model | Power | Q(m²/h) | 0 | 2.4 | 3 | 4.2 | 4.8 | 6 | 6.6 | 8.4 | 9.6 | 10.8 | |||
| Single phase | Three phases | kW | HP | Q(L/min) | 0 | 40 | 50 | 70 | 80 | 100 | 1100 | 140 | 160 | 180 | |
| 2CPM25/130 | 2CP25/130 | 0.75 | 1 | H(m) | 42 | 36.2 | 32.5 | 28 | 22 | ||||||
| 2CPM25/140M | 2CP25/140M | 1.1 | 1.5 | 47 | 46.7 | 45.4 | 41.7 | 38 | 34 | 30 | 23 | ||||
| 2CPM160/160 | 2CP160/160 | 1.5 | 2 | 66 | 60 | 55 | 49.8 | 44 | 36.4 | 29.5 | |||||
| 2CPM25/160B | 2CP25/160B | 1.5 | 2 | 58 | 56.4 | 54.3 | 51.4 | 48 | 44 | 39 | 33 | 26 | |||
| 2CPM25/160A | 2CP25/160A | 2.2 | 3 | 68 | 66 | 63 | 60 | 57 | 54 | 50 | 43.5 | 36.2 | 28 | ||
| 2CPM32/200C | 2CP32/200C | 3 | 4 | 70 | 68 | 65 | 62 | 60 | 56.5 | 53.5 | 50 | 45.1 | 41 | ||
| 2CPM50/160B | 2CP50/160B | 1.5 | 2 | 56.5 | 54.5 | 50.5 | 46 | 41 | 35 | 28 | |||||
| 2CPM50/160A | 2CP50/160A | 2.2 | 3 | 68 | 63 | 59 | 54 | 50 | 46 | 42 | |||||
| Model | Enter exit | N.W | L*W×H | |||
| Single phase | Three phases | (Inch) | (Kg) | （mm) | ||
| 2CPM25/130 | 2CP25/130 | 1¼"×1" | 15 | 370×225×260 | ||
| 2CPM25/140M | 2CP25/140M | 1½"×1" | 20.5 | 410×242×280 | ||
| 2CPM160/160 | 2CP160/160 | 1¼"×1" | 25 | 435×250×305 | ||
| 2CPM25/160B | 2CP25/160B | 1½"×1" | 25 | 435×250×305 | ||
| 2CPM25/160A | 2CP25/160A | 1½"×1" | 27 | 518×278×345 | ||
| 2CPM32/200C | 2CP32/200C | 1½"×1¼" | 40 | 518×278×345 | ||
| 2CPM50/160B | 2CP50/160B | 2"×2" | 38 | 450×260×330 | ||
| 2CPM50/160A | 2CP50/160A | 2"×2" | 40 | 450×260×330 | ||
| Numbers | Notes | Numbers | Description | Numbers | Description | ||||||
| 1 | Discharge plug | 13 | Pump bracket | 25 | In Fairlea | ||||||
| 2 | "O" Ring | 14 | Latch | 26 | Walnuts | ||||||
| 3 | Latch | 15 | Housing with wound stator | 27 | clamping panel | ||||||
| 4 | Pump housing | 16 | Station | 28 | Condenser | ||||||
| 5 | Walnuts | 17 | Pilot's hat | 29 | Fall protection | ||||||
| 6 | Spring washer | 18 | Latch | 30 | Relationship | ||||||
| 7 | Wheel | 19 | Fan | 31 | Key | ||||||
| 8 | Pad | 20 | Fan cover | 32 | Rotor | ||||||
| 9 | Disc | 21 | Latch | 33 | Relationship | ||||||
| 10 | Wheel | 22 | Clamp cover | 34 | Open ring | ||||||
| 11 | Clamp ring | 23 | Screw | ||||||||
| 12 | Mechanical seal | 24 | Cable press | ||||||||
