Installation and use:ZEN controllers feature high quality, multi-functionality, low noise, high versatility, etc., this series of controllers ensures high reliability and efficiency. The controller can automatically start and stop the pump depending on the pressure. If there is not enough water, stop the pump. After a power outage, restart the pump automatically after turning it on. With its reliability and flexibility, this controller is suitable for hotels, apartments, residential areas, high-rise buildings, gardens, offices, water treatment equipment and so on.
• Sleep function: No need to slow down the pump to the lower limit to fall asleep after testing. As long as the pressure does not drop below the set value, the main pump automatically wakes up.
• Reboot after power on: Power off during operation and reboot when turned on again.
• Start/stop terminal: From the terminal you can connect to an external switch. When the switch is turned on, the pump runs and maintains the set constant pressure; When switched off, the pump stops.
• Easy installation, no maintenance required
• Electrical fault protection: The controller automatically stops when overcurrent, overvoltage, undervoltage, phase failure, overload, etc. occur.
| Model | Voltage | starting pressure | Now | Size | Protection class | GW | NW |
| A | Inch | kg | kg | ||||
| EPC-2 | 220-240V/110-115V | 1.5/2.2Bar | 10A | 1"X1'' | IP65 | 17 | 15.0 |
