C-W1 Single Pump Controller

C-W1 Single Pump Controller

single pump regulator

C3 - W1 С1 - W1

Key Features:

Rated input voltage:

C3 - W1 AC380V/50HZ, Three phases

C1 - W1 AC220V/50HZ, Single phase

Rated output power:

C3 - W1 0.75KW-4KW(1hp-5.5hp)5.5KW-7.5KW(7.5hp-10hp)11KW(15hp)15KW(20hp)

C1 - W1 0.37KW-2.2KW(0.5hp-3hp)

Protection function:

◆ Protection against dry operations without sensors

◆ Overload protection

◆ Low/over voltage protection

◆ Phase protection

◆ engine stall protection

◆ Phase imbalance protection *

◆ Phase inversion protection *

◆ Overheat protection *

◆ Leakage protection (adjustable)

Main features:

◆ Control characteristics: pulse electrode probe / float switch / electric contact

◆ Pressure gauge/pressure switch

◆Features: HD liquid crystal dynamic English

◆ Control mode: manual / automatic

◆ Full protection in manual / automatic mode

◆ Five recent pump failures.

◆ Show the total operating time of the pump

◆ anti-corrosion protection of the pump shaft

◆ scintillation command in the opposite direction of the probe line

◆ Fast water supply when power is cut off or restored

◆ Fault warning

◆Status setting

◆ Remote network port

◆ Remote monitor optional (SC1)

◆ Calibration button

◆ Liquid level sensor transmission distance is 1000m

◆ Drain and drain alarm detector

Protection class: IP54

Typical application example

Single pump controller, for: