APM Intelligent Frequency Inverter Class A Hot Water Circulating PumpApplication Limitations◎ Liquid temperature: 2°C - 110°C◎ Maximum ambient temperature + 40°C◎ Maximum pressure 10 bar.◎ Protection class: IP42◎ Connection: 220V - 240V 50Hz - 60Hz◎ Insulation class: F◎ Fluid pumping ......
◎ Liquid temperature: 2°C - 110°C
◎ Maximum ambient temperature + 40°C
◎ Maximum pressure 10 bar.
◎ Protection class: IP42
◎ Connection: 220V - 240V 50Hz - 60Hz
◎ Insulation class: F
◎ Fluid pumping characteristics: Clean, free of solid and mineral oils, non-toxic, chemically neutral, similar to water properties
◎ Installation: The motor axis should be in horizontal direction
◎ pH: 6,5 - 8,5
For domestic hot water systems, such as hybrid water heating systems, air power hot water circulation systems, solar power hot water circulation systems and domestic hot water systems, pressurized cold water cycles and so on.
Maximum flow: 3 m³/h
Maximum head: 6 m
◎ Minimum energy consumption of rated energy efficiency "A"
◎ Intelligent magneto frequency conversion control
◎ Proportional pressure (PP) mode
◎ Constant pressure mode (CP)
◎ Constant speed mode (S)
◎ Auto model
◎ Night retreat mode
◎ Show actual power
◎ Low noise, no leakage
◎ The product can be customized according to the customer's voltage and frequency.
Pos. | Component | Material |
1 | Pump housing Working wheel Magnetic ring Val Thrust bearing Radial bearing Radial Bearing Bushing Pump cover Magnet Ring Sleeve Magnetic ring package |
Cast iron PES+GF Ferrite Ceramics Graphite Ceramics EPDM SS 304 SS304 PA66+30%GF |
3 | O-ring I | EPDM |
4 | Rotor can thrust bearing | SS304 Graphite |
5 | O-ring | EODM |
6 | Air valve | Brass |
7 | Stator | / |
8 | Stator housing | Aluminum |
9 | Hex head screws | steel |
10 | Cable Connector Component | PA66G30 |
11 | Control unit gasket | EPDM |
12 | Control box seal | PC |
13 | Driver PCB board | / |
14 | Control box cover | PC |
15 | screws | Stainless steel |
16 | Rubber plug | NBR |
17 | Control Panel | PVC+PET |
Model | Input power P1(W) |
Current(A) |
Distance between pipes(mm) |
MAX.HEAD (m) |
The whole elevator (m) |
MAX. FLOW (m³/h) |
Inter Box | Outer box | 20" Loading Qty (pcs) |
|||
220V 50Hz/60Hz | G.W.(kg) | Dim.(L×W×H) | PCS/CTN | Smoke. (L×W×H) | G.W.(kg) | |||||||
APM20-4-130 | 22 | 0.17 | 130 | 4 | 0~4 | 2.5 | 2.1 | 200x145x175 | 4 | 420x310x195 | 13 | 5760 |
APM20-6-130 | 45 | 0.35 | 6 | 0~6 | 3 | |||||||
APM25-4-130 | 22 | 0.17 | 130 | 4 | 0~4 | 2.5 | 2.4 | 200x145x175 | 4 | 420x310x195 | 14.5 | 5760 |
APM25-6-130 | 45 | 0.35 | 6 | 0~6 | 3 | |||||||
APM25-4-180 | 22 | 0.17 | 180 | 4 | 0~4 | 2.5 |
2.5 |
200x145x175 | 4 | 420x310x195 | 15.5 | 5760 |
APM25-6-180 | 45 | 0.35 | 6 | 0~6 | 3 | |||||||
APM32-4-180 | 22 | 0.17 | 180 | 4 | 0~4 | 2.5 | 2.7 | 200x145x175 | 4 | 420x310x195 | 16.5 | 5760 |
APM32-6-180 | 45 | 0.35 | 6 | 0~6 | 3 |
Model |
Dim.(mm) | Weight (without cable)/kg | ||||
H | H1 | L | G | B | ||
APM20-4-130 | 138 | 112 | 130 | 1" | 93 | 1.94 |
APM20-6-130 | ||||||
APM25-4-130 | 160 | 135 | 130 | 1½" | 93 | 2.12 |
APM25-6-130 | ||||||
APM25-4-180 | 160 | 135 | 180 | 1½" | 93 | 2.27 |
APM25-6-180 | ||||||
APM32-4-180 | 165 | 135 | 180 | 2" | 93 | 2.46 |
APM32-6-180 |